Seq repeat, File, Edit list repeat – B&K Precision 9116 - Manual User Manual
Page 53: Seq 1 repeat: 1, List repeat = 1
40
4.
The display prompts the user to enter the number of times to repeat the program (list).
For this example, enter 5 with the numeric keypad and then press
.
Note: The maximum number of repeat times is 65535 times.
5.
The next display will show the following:
6.
This is similar to step 5 and 6 in the previous section for Configure Sequence
Parameters. Each of the numbers on the display represents the sequence numbers
stored in memory, with “0” representing sequence # 10.
7.
In this example, only sequence #1 and sequence #2 will be executed. Therefore, use the
numeric keypad and press 1 and 2 so that both of those numbers on the display will
toggle to “Y” in their places like the following:
8.
Once these two sequences are selected (active), press
to see the following:
SEQ REPEAT
Seq 1 Repeat: 1
FILE
Active Seq: 09876543YY
FILE
Active Seq: 0987654321
EDIT LIST REPEAT
List Repeat = 1