Select storage group, Save settings, Recall settings – B&K Precision 9116 - Manual User Manual
Page 33: Save data to bank : 0, Group = 0
20
to store settings (0 to 9). The memory group must be selected from the menu first, before
settings can be saved within the group.
Select Storage Group
1.
From the SYSTEM menu, browse and select Memory and press
. The following
screen will appear.
2.
Use the current adjust knob or the numeric keypad to enter the storage group. Select
between 0 – 9. Press
to save selection.
3.
To exit the menu at any time, press
twice.
Save Settings
1.
Set up all the instrument settings that you want to save.
2.
Then, press
and
. The display will show the following:
3.
Use the current adjust knob or the numeric keypad to enter the memory location in
which to store current instrument settings. Select between 0 – 9. Press
to save
to the selection location.
4.
If it saved successfully, there will be a message on display: Save Success!
Recall Settings
80.000V
12.000A
Save Data to Bank : 0
OFF
MEMORY
Group = 0