B&K Precision 9116 - Manual - Manual (Page 31)

18
To clear the trip status, press once.
3.3 SYSTEM Menu
All setup procedures and settings explained in this section can be accessed from the SYSTEM
menu. To access this menu, press and press . When SYSTEM is blinking, press
.
Restore Factory Default Settings
All instrument settings can be reset back to their factory default values by doing the following:
Restoring the instrument to factory default will change all current instrument
settings and parameters back to their default values.
1. From the SYSTEM menu, select Initialize and press .
2. The instrument will return to the normal display and all settings are now restored back
to factory default. The below table lists some of the factory default settings.
Table 3.1 - Factory Default Settings
Communication Address 0
Key Sound ON
Trigger Mode Manual
Communication Interface RS232
RS232 Settings 4800, 8, N, 1
Return Meter Off
Memory Group 0
80.000VOPP 12.000A
0.0W
OFF Prot