Atec Tektronix-DPO7000 Series - Manual (Page 15)

Digital Phosphor Oscilloscopes — DPO7000 Series
Computer System and Peripherals
Characteristic Description
Operating System Windows XP
CPU Intel Pentium 4, 3.4 GHz processor
PC System Memory 2 GB
Hard Disk Drive Rear-panel, removable hard disk drive, 80 GB capacity
CD/DVD Drive Front-panel CD-R/W, DVD-R drive
Mouse Optical wheel mouse, USB interface
Input/Output Ports
Port Description
Front Panel
Probe Compensator
Output
Front-panel pins. Amplitude 1 V ±20% into a ≥50 Ω
load; 500 mV from base to top into a 50 Ω load,
frequency 1 kHz ±5%
Recovered Clock
(for DPO7254 or
DPO7354 only)
BNC connector, ≤1.25 Gb/s, Output swing ≥130 mV
p-p
into 50 Ω. Requires Option MTM to enable
Recovered Data (for
DPO7254 or DPO7354
only)
BNC connector, ≤1.25 Gb/s, Output swing 200 mV into
50 Ω. Requires Option MTM to enable
USB 2.0 Port One USB 2.0 host connector
Aux Trigger Input See trigger specification
Side Panel
Parallel Port IEEE 1284, DB-25 connector
Audio Ports Miniature phone jacks
Keyboard Port PS-2 compatible
Mouse Port PS-2 compatible
USB Ports Four USB 2.0 host connectors
LAN Port RJ-45 connector, supports 10BASE-T, 100BASE-T, and
Gigabit Ethernet
Serial Port DB-9 COM1 port
VGA Video Port DB-15 female connector; connect a second monitor
to use dual-monitor display mode. Supports basic
requirements of PC99 specifications
Oscilloscope VGA Video
Port
DB-15 female connector, 31.6 kHz sync, EIA RS-343A
compliant, connect to show the oscilloscope display,
including live waveforms on an external monitor or
projector
Rear Panel
Power 100 to 240 V
RMS
±10%, 47 to 63 Hz, <550 W
115 V
RMS
±10%, 360 to 440 Hz
CAT I, <500 VA
Analog Signal Output BNC connector provides a buffered version of the signal
that is attached to the CH3 input
Amplitude 50 mV/div ±20% into a 1 MΩ load, 25 mV/div ±20%
into a 50 Ω load
Bandwidth 100 MHz into a 50 Ω load
External Time Base
Reference In
BNC connector, time base system can phase lock to
external 10 MHz reference
Aux Out (Software switchable)
Time base reference
out
BNC connector, provides TTL-compatible output of
internal 10 MHz reference oscillator
Trigger output BNC connector provides a TTL-compatible, polarity
switchable pulse when the oscilloscope triggers
GPIB Port IEEE 488.2 standard
Physical Characteristics
Benchtop Configuration
Dimension
mm in.
Height 292 11.48
Width 451 17.75
Depth 265 10.44
Weight kg lb.
Net 15 32
Shipping 28.9 63.75
Rackmount Configuration
Dimension
mm in.
Height 331 12.25
Width 479 18.85
Depth (from rackmounting
ear to back of instrument)
231.75 9.12
Weight kg lb.
Net 17.4 37.5
Rackmount Kit 2.5 5.5
Mechanical
Cooling – Required Clearance
Dimension mm in.
Top 0 0
Bottom 0 0
Left Side 76 3
Right Side 0 0
Front 0 0
Rear 0 0
www.tektronix.com 15