Atec Rohde-Schwarz-ZNB Series - Manual (Page 9)

Version 07.00, August 2013
Rohde & Schwarz R&S ® ZNB Vector Network Analyzer 9
Measurement accuracy of the R&S ® ZNB4 and the R&S ® ZNB8
This data is valid between +18 °C and +28 °C, provided the temperature has not varied by more than 1 °C after calibration. Validity of
the data is conditional on the use of an R&S ® ZV-Z270 calibration kit. This calibration kit is used to achieve the effective system data
specified below. Frequency points, measurement bandwidth and sweep time have to be identical for measurement and calibration
(no interpolation allowed).
Accuracy of transmission measurements
Above 9 kHz +5 dB to –35 dB < 0.05 dB or < 0.5°
–35 dB to –50 dB < 0.1 dB or < 1°
–50 dB to –65 dB < 0.2 dB or < 2°
Specifications are based on a matched DUT, a measurement bandwidth of 10 Hz and a nominal source power of –10 dBm.
0,01
0,10
1,00
10,00
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient |S21| in dB
M
ag
ni
tu
de
U
nc
er
ta
in
ty
in
d
B
9kHz to 100kHz
100kHz to 4.5GHz
4.5GHz to 8.5GHz
0,1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient |S21| in dB
Ph
ase u
ncer
tai
nt
y i
n d
eg
rees
9kHz to 100kHz
100kHz to 4.5GHz
4.5GHz to 8.5GHz
Typical accuracy of transmission magnitude and transmission phase measurements for the R&S ® ZNB4 in the frequency range
from 9 kHz to 4.5 GHz, for the R&S ® ZNB8 in the frequency range from 9 kHz to 8.5 GHz.
Analysis conditions: S
11
= S
22
= 0, cal. power –10 dBm, meas. power –10 dBm.
Accuracy of reflection measurements
9 kHz to 50 MHz 0 dB to –15 dB < 0.3 dB or < 2°
–15 dB to –25 dB < 0.8 dB or < 6°
–25 dB to –35 dB < 3.0 dB or < 17°
50 MHz to 4 GHz 0 dB to –15 dB < 0.2 dB or < 2°
–15 dB to –25 dB < 0.6 dB or < 4°
–25 dB to –35 dB < 2.0 dB or < 12°
4 GHz to 8.5 GHz 0 dB to –15 dB < 0.3 dB or < 2°
–15 dB to –25 dB < 0.8 dB or < 6°
–25 dB to –35 dB < 3.0 dB or < 17°
Specifications are based on an isolating DUT, a measurement bandwidth of 10 Hz and a nominal source power of –10 dBm.
0,00
0,01
0,02
0,03
0,04
0,05
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1
Reflection coefficient |S11| (linear)
M
ag
ni
tu
de u
ncer
tai
nt
y (
lin
ear
)
9kHz to 100kHz
100kHz to 4.5GHz
4.5GHz to 8.5GHz
0,00
1,00
2,00
3,00
4,00
5,00
6,00
7,00
8,00
9,00
10,00
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1
Reflection coefficient |S11| (linear)
Ph
ase u
ncer
tai
nt
y (
lin
ear
)
9kHz to 100kHz
100kHz to 4.5GHz
4.5GHz to 8.5GHz
Typical accuracy of reflection magnitude and reflection phase measurements for the R&S ® ZNB4 in the frequency range
from 9 kHz to 4.5 GHz, for the R&S ® ZNB8 in the frequency range from 9 kHz to 8.5 GHz.
Analysis conditions: S
12
= S
21
= 0, cal. power –10 dBm, meas. power –10 dBm.