Atec Fluke-OptiView - Manual (Page 24)

24
Fluke Networks OptiView™ Integrated Network Analyzer
General Specifications
Weight • Without external battery 2.1 kilograms (4.6 lbs)
• With external battery 2.8 kilograms (6.2 lbs)
Dimensions 26.0 x 23.4 x 6.4 centimeters (10.3 x 9.2 x 2.5 inches)
Display LCD touch screen, 640 x 480 pixels, passive color panel, active area 157.42 mm x 118.06 mm, CCFT back-light
and bezel, touch pad
LED indicators 16 (21 with external battery)
Power
Internal battery Lithium Ion 10.8V DC (nominal), 2.2Ah
External battery Lithium Ion 10.8V DC (nominal), 4.7Ah
External AC adapter/battery charger AC input: 120V - 240V, 50/60Hz, 1.5A
DC output: 15V, 3.3A
Ports
Communication and accessory ports 2 USB, 1 multibus PCMCIA (PC Card type II), 1 DB-9 serial, 1 PS2 compatible key-board, 1 PS2 compatible mouse
Network analysis ports RJ-45 10/100BASE-T Ethernet, Fiber 100BASE-FX (OptiView Pro, Pro Gigabit), fiber 1000BASE-X GBIC (OptiView Pro
Gigabit)
Network Standards
LAN Interfaces IEEE 10BASE-T, IEEE 100BASE-TX, IEEE 100BASE-F, IEEE 1000BASE-X
Standard SNMP MIBs Used RFCs: 1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 2021, 2108, 2115
Media
Cable Types • Unshielded Twisted Pair LAN cables (100 and 120 Ohm UTP category 3, 4, 5, 5E, and 6 ISO/IEC Class C and D)
• Foil-screened Twisted Pair cables (100 and 120 Ohm ScTP category 3, 4, 5, and 6 ISO/IEC Class C and D)
Cable Length 1 Resolution 0.1m (1ft)
Characteristic Impedance • 50 to 150 Ohms, cables 3-5 m (10-16 ft.) +/- (5 Ohms +10%)
• 50 to 150 Ohms, cables >5 m (16 ft.) +/- (5 Ohms +5%) Resolution: 1 Ohm
Specifications