Atec Fluke-OptiView - Manual (Page 21)

21
Fluke Networks OptiView™ Integrated Network Analyzer
Ethernet
The Ethernet Setup screen allows you to override the default Ethernet
port settings. The default settings are all set to automatic. This screen
also shows you the link capabilities of the port to which the analyzer is
connected. The MAC address of the analyzer can be changed and placed
in a receive only mode where no frames are transmitted.
Security
This screen provides access to analyzer security settings for packet
capture, remote access and SNMP configuration. The feature allows you
to selectively disable certain functions on the analyzer by requiring the
use of a password. This feature also allows for entry of analyzer Read
and Read/Write community strings for remote access of the RMON2
agent and also allows you to enter community strings used to
interrogate your managed devices.
Self Test
Provides access to the functional verification tests available in the
OptiView analyzer.
Display
This screen allows you to control the brightness and contrast of the
analyzers screen. Additionally, it can be used to calibrate the touch
screen and to adjust the component size from a larger to a smaller
touch target size.