Atec Fluke-OptiView - Manual (Page 19)

19
Fluke Networks OptiView™ Integrated Network Analyzer
Web Enabled Data Retrieval and Remote
User Interface
Simply point a Web Browser at the IP address of a correctly configured
OptiView analyzer to retrieve saved reports and capture files. While you
are there, select Install Remote User Interface and use your PC to
obtain remote access to an OptiView analyzer over a TCP/IP
connection. Once the Remote UI is installed, simply give the interface
the IP address of the OptiView analyzer you wish to monitor and see an
almost identical interface to the OptiView analyzer’s local interface.
Running from the Remote User Interface does not alter the OptiView
analyzer’s local interface. The Remote User Interface effectively shares
the network data acquisition card on the OptiView analyzer. Multiple
remote sessions may be run on a single OptiView analyzer.