Atec Agilent-DSA90404A - Manual (Page 16)

16
Pass today’s demanding compliance tests more quickly
10GBASE-T Ethernet Electrical Conformance Application for Infiniium Oscilloscopes
(U7236A or Option 036 on new scope purchases)
Takes care of the tedious task of instrument control and configures the oscilloscope,
spectrum analyzer, or vector network analyzer as needed by each 10GBASE-T test to
provide rapid, accurate, and repeatable test execution.
The application is supported on all models.
For more information: www.agilent.com/find/10gbase-t
Automatically execute 10GBASE-T Ethernet
physical-layer (PHY) electrical tests
USB 3.0 Compliance Test Software (U7243A or Option 041 on new scope purchases
Provides industry leading automated test support for USB 3.0 products and displays the
test results in a comprehensive test report. For best measurement accuracy use the
Agilent U7242A USB 3.0 transmitter and receiver test fixtures. Agilent’s USB 3.0 test
solution is designed from the ground up with the needs of the test engineer in mind.
The application is supported on models >= 12 GHz
For more information: www.agilent.com/find/USB3
Validate and debug your USB 3.0 silicon,
host, hub or device
DDR1 and LPDDR/DDR2, LPDDR2/DDR3, DDR4 and GDDR5 compliance testing
(U7233A/N5413B/U7231B/N6462A/U7245A or Options 031/032/033/058 on new
scope purchases)
Quickly and easily evaluate and characterize your memory designs. Automated test-
ingbased on JEDEC specifications saves time. The application also includes additional
debug and compliance capabilities.
This application is supported on all models. However, the DDR technology you are
using may dictate the minimal bandwidth required for your scope.
For more information: www.agilent.com/find/DDR
Test DDR memory.
SD UHS-I and SD UHS-II Card Compliance Testing (U7246A/N6461A)
The SD card compliance test software gives you a fast, easy way to test, debug and
characterize your SD designs up to 1.5 Gb/s in accordance with the SD Specification.
The U7246A with 9000A and 90000A Series oscilloscopes is a certified test tool for SD
Card Phy electric tests with the SD Association. Reference is available in SDA official
document: SD Test Tool Information Ver1.0 Sep. 13, 2010.
For more information: www.agilent.com/find/U7246A
www.agilent.com/find/N6461A
Comprehensive analysis that automates
the complex measurements even when
you are not there.