Atec Agilent-DSA90404A - Manual (Page 11)

11
Debug your toughest designs with confidence
I 2 C/SPI serial trigger and decode (N5391A or Option 007 on new scope purchases)
This application displays real-time time-aligned decode of I2C and SPI packets. View
decode in waveform area or in protocol lister.
This application works on all models.
For more information: www.agilent.com/find/90000_I2C-SPI
RS-232/UART serial decode and trigger (N5462A or Option 015 on new scope
purchases)
This application eliminates the need to manually decode bus traffic. Using data captured
on the scope channels, the application lets you easily view the information sent over an
RS-232.
Display real-time time-aligned decode of transmit and receive lines.
This application works on all models.
For more information: www.agilent.com/find/90000_RS-232
Trigger and view on-screen serial decode
of I 2 C packets.
Trigger on and decode RS-232/UART
transmission.
N8805A USB 3.0 Protocol Triggering and Decode (N8805A)
Trigger on and view USB 3.0 with the industry’s first oscilloscope-based protocol
analyzer with time-correlated views of physical layer and transaction layer errors.
The multi-tab protocol viewer includes correlation between the waveforms and the
selected packet, enabling you to quickly move between the physical and protocol layer
using the time-correlated tracking marker.
For more information: www.agilent.com/find/usb3decode
Isolate signal integrity problems from logic-level coding
errors on bidirectional serial data streams.
JTAG (IEEE 1149.1) triggering and decode (N8817A or Option 042 on new scope
purchases)
This application displays real-time time-aligned decode of JTAG (IEEE 1149.1) TDI
and TDO signals. The application eliminates the difficult task of manually determin-
ing JTAG TAP controller states, instruction and data register decode, and flags error
conditions. The application includes scan chain description features including the
ability to import .bsdl files for each device and displays device names and opcodes in
the protocol listing.
This application works on all models and can use any combination of scope or logic
acquisition channels.
For more information: www.agilent.com/find/90000_JTAG
Trigger on and decode JTAG packets.