Atec Agilent-DSA90404A - Manual (Page 14)

14
Pass today’s demanding compliance tests more quickly
Fully Buffered DIMM Compliance Application (N5409A or Option 024 on new scope
purchases)
Quickly characterize and evaluate the signal integrity of both your high speed FB-DIMM
signals as well as your reference clock. All tests are based on the JEDEC High Speed
Point-to-Point Link Specification.
This application is supported on all models >=10 GHz bandwidth.
For more information: www.agilent.com/find/N5409A
Characterize and evaluate the signal
integrity of both your high speed FB-DIMM
signals as well as your reference clock.
Energy Efficient Ethernet Application (N5392B or Option 060 on new scope purchases)
Industry leading compliance application that measures 10/100/1000BTe Energy Efficient
Ethernet IEEE 802.3az-2010 specification. Exclusive EEE fixture allows you to measure
all test modes at all speeds. Detailed reporting with clear measurements and pass/fail
results.
This application is supported on all models.
For more information: www.agilent.com/find/EEE
Characterize and evaluate the signal
integrity of your Energy Efficient
Ethernet devices.
SATA 6G Compliance Test Software (N5411B or Option 038 on new scope purchases)
Rapidly validate and debug your SATA 1.5Gb/s (Gen 1), 3.0 Gb/s (Gen2) and 6.0 Gb/s
(Gen3) silicon, host bus adapter, port multiplier, high-density disk drive, solid-state
disk drive or optical disk drive. Provides automated compliance test support for the i
(internal), m(eSATA) and x(SAS attachment) interfaces points, and displays the results
in a flexible report format.
This application is supported on all models >= 12 GHz bandwidth.
For more information: www.agilent.com/find/N5411B
Simplify the validation of SATA designs.
U7232B DisplayPort Compliance Test Software (U7232B or Option 045 on new scope
purchases)
Sets the benchmark for ease-of-use, and offers complete testing without compromise.
The software guides the user sequentially through the tasks ensuring minimal setup error,
executes the tests specified by the standard and conveys the test information through a
convenient software generated report. The three modes of physical layer test allow for
automated measurements based on the customizable configuration of compliance and
characterization testing. To make the test signal connection, the Agilent W2641B Display-
Port test point access adaptor completes the DisplayPort source solution.
The application is supported on all models >= 8 GHz.
For more information: www.agilent.com/find/U7232B
Full suite of DisplayPort source tests.