Atec Agilent-DSA90404A - Manual (Page 15)

15
Pass today’s demanding compliance tests more quickly
USB 2.0 Compliance Test Software (N5416A or Option 029 on new scope purchases)
Quickly determine USB compliance with this USB-IF recognized solution. A setup
wizard guides you through test selection and configuration.
This application is supported on all models.
For more information: www.agilent.com/find/N5416A
Check for USB compliance.
XAUI Electrical Validation with 10GBASE-CX4, CPRI, OBSAI, and Serial RapidIO
Support (N5431A or Option 030 on new scope purchases)
Improve your efficiency by confirming that your devices conform to the XAUI specifi-
cations as defined by the IEEE 802.3-2005 10-gigabit Ethernet specification. Provides
support for the XAUI-derived 10GBASE-CX4 specification.
The application is supported on all models.
For more information: www.agilent.com/find/N5431A
Perform automated testing and margin analysis
for XAUI and XAUI-derived specifications.
DVI Electrical Performance Validation & Compliance Software (N5394A or Option 034
on new scope purchases)
Automatically execute DVI electrical checklist tests and display the results in a flexible
report format. In addition to the measurement data, the report provides a margin analy-
sis that shows how closely your device passed or failed each test.
The application is supported on all models >= 4GHz.
For more information: www.agilent.com/find/90000
Verify and debug your DVI designs more easily.
MIPI D-PHY Compliance Test Software (U7238A or Option 035 on new scope
purchases)
Automatically execute D-PHY electrical checklist tests for CSI and DSI architectures.
Displays the results in a flexible report format.
The application is supported on all models.
For more information: www.agilent.com/find/d-phy_compliance
Automatically execute D-PHY electrical checklist
tests for CSI and DSI architectures.