Atec Agilent-DSA90404A - Manual (Page 12)

12
SATA triggering and decode (N8801A or option 018 on new scope purchases)
Trigger on and view both protocol layer information and physical layer signal
characteristics for SATA 1.5 Gb/s, 3.0 Gb/s, and 6.0 Gb/s. Numerical decode values
are automatically displayed and synchronizes below the capture signal or seen in
protocol viewer.
This application works on all models.
For more information: www.agilent.com/find/N8801A
Trigger on and decode SAS/SATA serial packets .
PCI Express ® serial trigger and protocol viewer (N5463A or Option 017 on new
scope purchases)
This application provides protocol-level triggering and viewing of a PCIe® lane. Quickly
view packets, payload, header, and detail information. Powerful time-correlated views
of waveform, symbol, character, link and transaction layer packet data down to the bit
level make it easy to isolate communication faults to logic or analog sources.
This application is supported on all 4 GHz and greater models.
For more information:
www.agilent.com/find/90000_PCI_protocol_viewer
Trigger on and decode PCIe serial packets.
USB serial trigger and protocol viewer (N5464A or Option 016 on new scope
purchases)
Trigger on and quickly view USB 2.0 packets, payload, header and detail information.
Powerful time-correlated views of waveform and symbol, to the bit level, make it easy
to isolate communication faults.
This application is supported on all models.
For more information:
www.agilent.com/find/90000_USB_protocol_viewer
Trigger on and decode USB packets.
Pass today’s demanding compliance tests more quickly