Atec Agilent-E5062A - Manual (Page 3)

3
Corrected system performance
The specifications in this section apply for measurements made with the
Agilent E5061A/E5062A network analyzer with the following conditions:
• No averaging applied to data
• Environmental temperature of 23°C ± 5°C, with less than 1°C deviation
from the calibration temperature
• Response and isolation calibration not omitted
Table 1-1 System dynamic range 1
Description Specification Supplemental information
System dynamic range
300 kHz to 3 GHz, IF bandwidth = 3 kHz 90 dB 95 dB
300 kHz to 3 GHz, IF bandwidth = 10 Hz 115 dB 120 dB
1. The test port dynamic range is calculated as the difference between the test port rms noise floor
and the source maximum output power. The effective dynamic range must take measurement
uncertainty and interfering signals into account.