Atec Agilent-E5062A - Manual (Page 22)

22
Storage
System capabilities
Internal hard disk drive Store and recall instrument states, calibration data, and trace data
on 10 GB, minimum, internal hard drive. Trace data can be saved in CSV
(comma separated value) format. All files are MS-DOS
® -compatible.
Instrument states include all control settings, limit lines, segment sweep
tables, and memory trace data.
File sharing Internal hard disk drive (D:) can be accessed from an external
Windows
® PC through LAN.
Disk drive Instrument states, calibration data, and trace data can be stored on
an internal 3.5 inch 1.4 MB floppy disk in MS-DOS
® -compatible format.
Screen hardcopy Printouts of instrument data are directly produced on a printer. The analyzer
provides USB and parallel interfaces.
Familiar graphical user interface The ENA-L analyzer employs a graphical user interface based on
Windows
® operating system. There are three ways to operate the instrument
manually: you can use a hardkey interface, touch screen interface (option
E5061A/E5062A-016) or a mouse interface.
Limit lines Define the test limit lines that appear on the display for pass/fail testing.
Defined limits may be any combination of horizontal/sloping lines and discrete
data points.