Atec Anritsu-MT8212E-MT8213E - Manual (Page 7)

Cell Master™ MT8212E and MT8213E Specifications
MT8212E and MT8213E TDS PN: 11410-00485 Rev. M 7 of 32
Channel Scanner (Option 0027)
Number of Channels 1 to 20 Channels
Measurements Graph/Table, Max Hold (On/5 s/Off), Freq/Channel, Current/Max, Single/Dual Color
Scanner Scan Channels, Scan Frequencies, Scan Customer List, Scan Script Master™
Amplitude Reference Level, Scale
Custom Scan Signal Standard, Channel, # of Channels, Channel Step Size, Custom Scan
Frequency Range 100 kHz to 4 GHz (MT8212E), 100 kHz to 6 GHz (MT8213E)
Frequency Accuracy ± 10 Hz + Time base error
Measurement Range –110 dBm to +26 dBm
Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
CW Signal Generator (Option 0028) (Requires CW Signal Generator Kit, P/N 69793)
Setup Parameters
Frequency Frequency, Signal Standard, Channel Number, Display Setup Help
Amplitude Power Level (Low/High), Offset (dB)
Frequency Range 2 MHz to 2 GHz
Frequency Reference Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On
Output Power High 0 dBm typical, Low –30 dBm typical
Attenuator (included in kit 69793): 0 to 90 dB in 1 dB steps
Gated Sweep (Option 0090)
Mode Spectrum Analyzer, Sweep
Trigger External TTL
Setup Gated Sweep (On/Off)
Gate Polarity (Rising, Falling)
Gate Delay (0 ms to 65 ms typical)
Gate Length (1 μs to 65 ms typical)
Zero Span Time