Spectrum analyzer – Atec Anritsu-MT8212E-MT8213E User Manual
Page 5

Cell Master™ MT8212E and MT8213E
Specifications
MT8212E and MT8213E TDS
PN: 11410-00485 Rev. M
5 of
Spectrum Analyzer
(Continued)
Spectral Purity
SSB Phase Noise @ 1 GHz
–100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset
–105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset
–115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range
> 102 dB (2.4 GHz), 2/3 (TOI-DANL) in 1 Hz RBW
Measurement Range
DANL to +26 dBm
Display Range
1 dB to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range
–120 dBm to +30 dBm
Maximum Continuous Input Power
+30 dBm
Attenuator Range
0 dB to 55 dB in 5 dB steps
Amplitude Units
Log Scale Modes: dBm, dBV, dBmV, dBμV, dBW, dBmW, dBμW, dBA, dBmA, dBμA
Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW, nA, μA, mA, A
Amplitude Accuracy
9 kHz to 100 kHz
± 2.00 dB typical
100 kHz to 4.0 GHz
± 1.25 dB, ± 0.5 dB typical
> 4.0 GHz to 6 GHz
± 1.50 dB, ± 0.5 dB typical
Displayed Average Noise Level (DANL)
Spurs
Residual Spurious
< –90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious
< –75 dBc (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz)
Exceptions, typical
< –70 dBc @ < 2.5 GHz, with 2072.5 MHz Input
< –68 dBc @ F1 – 280 MHz with F1 Input
< –70 dBc @ F1 + 190.5 MHz with F1 Input
< –52 dBc @ 7349 – (2F2) MHz, with F2 Input, where F2 < 2424.5 MHz
< –55 dBc @ 190.5 ± (F1/2) MHz, where F1 < 1 GHz
Third-Order Intercept (TOI)
Preamp Off (–20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz
+16 dBm
2400 MHz
+20 dBm
200 MHz to 2200 MHz
+25 dBm, typical
> 2.2 GHz to 5.0 GHz
+28 dBm, typical
> 5.0 GHz to 6.0 GHz
+33 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, –30 dBm input
50 MHz
–56 dBc
> 50 MHz to 200 MHz
–60 dBc, typical
> 200 MHz to 3000 MHz
–70 dBc, typical
VSWR
2:1, typical
Preamp Off
(Reference Level –20 dBm)
Preamp On
(Reference Level –50 dBm)
(RBW = 1 Hz, 0 dB attenuation)
Maximum
Typical
Maximum
Typical
10 MHz to 2.4 GHz
–141 dBm
–146 dBm
–157 dBm
–162 dBm
> 2.4 GHz to 4 GHz
–137 dBm
–141 dBm
–154 dBm
–159 dBm
> 4 GHz to 5 GHz
–134 dBm
–138 dBm
–150 dBm
–155 dBm
> 5 GHz to 6 GHz
–126 dBm
–131 dBm
–143 dBm
–150 dBm