Atec Anritsu-MT8212E-MT8213E - Manual (Page 21)

Cell Master™ MT8212E and MT8213E General Specifications
MT8212E and MT8213E TDS PN: 11410-00485 Rev. M 21 of 32
General Specifications
All specifications and characteristics apply under the following conditions, unless otherwise stated: 1) After 5 minutes of warm-up time, where the instrument is left in the ON state; 2) All specifications
apply when using internal reference; 3) All specifications subject to change without notice; 4) Typical performance is the measured performance of an average unit and is not warranted; 5) Recommended
calibration cycle is 12 months; 6) Performance Sweep Mode.
Setup Parameters
System Status (Temperature, Battery Info, Serial Number, Firmware Version, Options Installed)
Self Test, Application Self Test, GPS (see Option 0031)
System Options Name, Date and Time, Brightness, Volume
Language (English, French, German, Spanish, Chinese, Japanese, Korean, Italian, User defined)
Reset (Factory Defaults, Master Reset, Update Firmware)
File Save, Recall, Delete, Directory Management
Save/Recall Setups, Measurements, Screen Shots (.jpg) (save only)
Delete Selected File, All Measurements, All Mode Files, All Content
Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Internal Trace/Setup Memory 2,000 traces, 2,000 setups
External Trace/Setup Memory Limited by size of USB Flash drive
Mode Switching Auto-Stores/Recalls most recently used Setup Parameters in the Mode
Connectors
RF Out Type N, female, 50 Ω (Reflection In)
RF Out Damage Level 23 dBm, ± 50 VDC
RF In Type N, female, 50 Ω
RF Input Damage Level +33 dBm peak, ± 50 VDC, Maximum Continuous Input (≥ 10 dB attenuation)
ASI Output Connector BNC-J 75 Ω (with Option 0057 or Option 0079)
GPS SMA(f)
T1 Bantam jacks
T3 BNC connectors
E1 RJ48C
External Power 5.5 mm barrel connector, 12.5 VDC to 15 VDC, < 4.0 Amps
USB Interface (2) Type A (Connect USB Flash Drive and Power Sensor)
USB Interface 5-pin mini-B (Connect to PC for data transfer and/or remote control)
Headset Jack 3.5 mm mini-phone plug
External Reference In BNC, female, 50 Ω, Maximum Input +10 dBm, 1 MHz, 5 MHz, 10 MHz, 13 MHz
External Trigger/Clock Recovery BNC, female, 50 Ω, Maximum Input ± 50 VDC
Display
Type Resistive Touchscreen
Size 8.4" daylight viewable color LCD
Resolution 800 x 600
Pixel Defects No more than one defective pixel (99.9997% good pixels)
Battery
Type Li-Ion
Battery Operation 3.0 hours, typical
Electromagnetic Compatibility
European Union CE Mark, EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Australia and New Zealand C-tick N274
Interference EN 61326-1
Emissions EN 55011
Immunity EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-11
Safety
Safety Class EN 61010-1 Class 1
Product Safety IEC 60950-1 when used with Company supplied Power Supply
Environmental
Operating Temperature –10 ºC to 55 ºC
Maximum Humidity 95% RH (non-condensing) at 40 ºC
Shock MIL-PRF-28800F Class 2
Storage –40 ºC to 71 ºC
Altitude 4600 meters, operating and non-operating
ESD
RF Port Center Pin Withstands up to ± 15 kV