Atec Anritsu-MT8212E-MT8213E User Manual
Page 4
PN: 11410-00485 Rev. M
MT8212E and MT8213E TDS
Specifications
Cell Master™ MT8212E and MT8213E
Spectrum Analyzer
Measurements
Smart Measurements
Field Strength (uses antenna calibration tables to measure dBm/m
2
, dBmV/m, dBV/m, dBμV/m, Volt/m,
Watt/m
2
, dBW/m
2
, A/m, dBA/m and Watt/cm
2
)
Occupied Bandwidth (measures 99 % to 1 % power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Emission Mask
Coverage Mapping (requires Option 0431)
Setup Parameters
Frequency
Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment
Amplitude
Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span
Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
Bandwidth
RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW
File
Save, Recall, Delete, Directory Management
Save/Recall
Setups, Measurements, Limit Lines, Screen Shots (.jpg) (save only), Save-on-Event
Save-on-Event
Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
Delete
Selected File, All Measurements, All Mode Files, All Content
Directory Management
Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Application Options
Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
Sweep Functions
Sweep
Single/Continuous, Sweep Mode (Fast, Performance, No FFT), Reset, Detection, Minimum Sweep Time,
Trigger Type, Gated Sweep (see Option 0090)
Detection
Peak, RMS, Negative, Sample, Quasi-peak
Triggers
Free Run, External, Video, Change Position, Manual
Trace Functions
Traces
Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
Trace A Operations
Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
Trace B Operations
A → B, B ↔ C, Max Hold, Min Hold
Trace C Operations
A → C, B ↔ C, Max Hold, Min Hold, A – B → C, B – A → C, Relative Reference (dB), Scale
Marker Functions
Markers
Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker
Table (On/Off), All Markers Off
Marker Types
Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
Marker Auto-Position
Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to
Center, Delta Marker to Span, Marker to Reference Level
Marker Table
1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
Limit Line Functions
Limit Lines
Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
Limit Line Edit
Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
Limit Line Move
To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
Limit Line Envelope
Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
Limit Line Advanced
Type (Absolute/Relative), Mirror, Save/Recall
Frequency
Frequency Range
9 kHz to 4 GHz (MT8212E), 9 kHz to 6 GHz (MT8213E)
Tuning Resolution
1 Hz
Frequency Reference
Aging: ± 1.0 ppm/year
Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On
Frequency Span
10 Hz to 4 GHz including zero span (MT8212E), 10 Hz to 6 GHz including zero span (MT8213E)
Sweep Time
Minimum 100 ms, 10 µs to 600 s in zero span
Sweep Time Accuracy
± 2 % in zero span
Bandwidth
Resolution Bandwidth (RBW)
1 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth)
Video Bandwidth (VBW)
1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth)
RBW with Quasi-Peak Detection
200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth)
VBW with Quasi-Peak Detection
Auto VBW is On, RBW/VBW = 1