Atec Anritsu-MT8212E-MT8213E - Manual (Page 10)

10 of 32 PN: 11410-00485 Rev. M MT8212E and MT8213E TDS
Specifications Cell Master™ MT8212E and MT8213E
GSM/EDGE Signal Analyzers (Options 0040, 0041)
Setup Parameters
GSM/EDGE Select Auto, GSM, EDGE
Frequency Center, Signal Standard, Channel #, Closest Channel, Decrement/Increment Channel
Amplitude Power Offset, Auto Range, Adjust Range
Sweep Single/Continuous, Trigger Sweep
Save/Recall Setup, Measurement, Screen Shot (save only), to Internal/External Memory
Measurement Summary Screens Overall Measurements
RF Measurements (Option 0040) (Temperature range 15 ºC to 35 ºC)
Frequency Error ± 10 Hz + time base error, 99 % confidence level
Occupied Bandwidth Bandwidth within which 99 % of the power transmitted on a single channel lies
Burst Power Error ± 1.5 dB, ± 1 dB typical, (–50 dBm to +20 dBm)
Demodulation (Option 0041) (Temperature range 15 ºC to 35 ºC)
GSMK Modulation Quality (RMS Phase)
Measurement Accuracy ± 1 deg
Residual Error (GSMK) 1 deg
8 PSK Modulation Quality (EVM)
Measurement Accuracy ± 1.5 %
Residual Error (8 PSK) 2.5 %
Measurements
RF
(Option 0040)
Demodulation
(Option 0041) Over-the-Air (OTA)
Pass/Fail
(User Editable)
Channel Spectrum
Channel Power
Occupied Bandwidth
Burst Power
Average Burst Power
Frequency Error
Modulation Type
BSIC (NCC, BCC)
Multi-channel Spectrum
Power vs. Time (Frame/Slot)
Channel Power
Occupied Bandwidth
Burst Power
Average Burst Power
Frequency Error
Modulation Type
BSIC (NCC, BCC)
Phase Error
EVM
Origin Offset
C/I
Modulation Type
Magnitude Error
BSIC (NCC, BCC) There are no additional OTA
Measurements.
RF and Demodulation
measurements can be made OTA
Channel Power
Occupied Bandwidth
Burst Power
Average Burst Power
Frequency Error
Phase Error
EVM
Origin Offset
C/I
Magnitude Error