ETS-Lindgren HI-2200 RF Survey Meter - Manual (Page 24)

24 | Keypad and Display
Key Description
POWER Turns the unit on and off.
Function keys (4) • The four function keys select submenus displayed
at the bottom of each screen.
• These keys are also used for setting specific
values.
• The function of each key will change as different
screens are viewed.
BACK • Navigates back one menu level.
• This key also functions as an Enter key after
settings have been selected or changed.
• If BACK is pressed when in the monitoring screen,
the MAX and AVG values displayed on the
monitoring screen will be reset. This may also be
accomplished by holding the key down for
approximately four seconds.
• When viewing a data file, press BACK to return
the display to the main menu.
LOG keys (2) • The two LOG keys each perform the same
function. They are positioned on the left and right
to accommodate left-handed and right-handed
use.
• The default logging function is single point logging
(one data point is logged or saved with each log
key operation).
• Other logging functions are explained in Setup on
page 30.