ETS-Lindgren HI-2200 RF Survey Meter - Manual (Page 15)

Specifications | 15
3.0 Specifications
Meter Specifications
Internal Memory: >65,000 data points
User Selectable Units
(Probe Dependent):
V/m, μW/cm 2
, mW/cm
2
, W/m
2
A/m,
mA/m
Battery: Four AA
(1.2–1.5 V Nominal Alkaline or
Nickel-Metal Hydride or
Nickel-Cadmium)
Operating Life: Approximately 20 hours
(with new alkaline batteries)
Operating Temperature: -10 o C to 50 o C
Connector: RS-232 I/O serial interface six-pin
mini DIN
Probe Specifications
Probes must be calibrated or matched prior to using them with the
HI-2200. For more information, see Matched Probes on page 28.
The following tables represent probes that are designed to be used with the
HI-2200 RF Survey Meter.
M ODEL E100 E-F IELD P ROBE
Model E100 E-Field Probe
Sensor Type: Electric Field
Detection: Isotropic (Total Field Indication)
Frequency Range: 100 kHz – 5 GHz
Frequency Response: ± 1 dB (1 MHz to 4 GHz)
Dynamic Range: 0.3 V/m to 800 V/m (Single Range)