ETS-Lindgren HI-2200 RF Survey Meter - Manual (Page 13)

Maintenance | 13
2.0 Maintenance
Before performing any maintenance, follow
the safety information in the ETS-Lindgren
Product Information Bulletin included with
your shipment.
Maintenance of the HI-2200 is limited to
external components such as cables or
connectors.
If you have any questions concerning
maintenance, contact ETS-Lindgren
Customer Service.
Battery Replacement
The HI-2200 requires four AA batteries. See Specifications on
page 15 for additional battery specifications.
If the HI-2200 RF Survey Meter fails to power on, the batteries may be depleted.
To replace the batteries, follow the steps in Installing the Batteries on page 21 to
remove the battery tray from the HI-2200 and install new batteries.
Annual Calibration
See the Product Information Bulletin included with your shipment for information
on ETS-Lindgren calibration services.
WARRANTY