ATAS Eco-Seam - Manual

Eco-Seam is a one-piece, positive locking standing seam panel that can be fastened directly to
purlins as well as to solid underlayment. Eco-Seam panels are roll-formed from .032 aluminum and
24 gauge Metallic Coated steel. 16 oz copper is available subject to minimum quantities and lead
times. Eco-Seam panels are available in 12” and 16” widths. Panel lengths are cut to customer
specifications, with a minimum of 2’-0” and a maximum to transportation limitations. Specify with or
without stiffening ribs. Texture may be smooth or stucco embossed. Kynar 500
® or Hylar 5000 ®
based finish is available in 30 colors. An anodized finish is available in clear or bronze.
12”
16”
1/2”
1/2”
1-1/4”
1-1/4”
EECCOO SSEEAAM M PPaanneell
Installation Guide
Review and understand complete
guide before beginning installation.
This guide has been prepared as
suggested details to particular design
conditions. Each condition has certain
limitations to performance, aethetics or
economics. Professionals qualified to
assess this information for a specific project,
should determine that the selection and installation
are made to their requirements. ATAS cannot assume
any responsibility for the actual selection and/or
installation of materials. The panels, flashings and
trim shown in this guide are installed over solid and
plumb substrate. It is assumed that the structure has
been designed and prepared in accordance with local
building codes.