beautypg.com

ATAS Belvedere Short Rib BWK360 User Manual

Atas international, inc, Specification data sheet, Belvedere

background image

ATAS INTERNATIONAL, INC.

SPECIFICATION DATA SHEET

1. PRODuCT NAmE

BELvEDERE

Tm

SHORT RIB PANEL

BWK360

2. mANuFACTuRER

ATAS INTERNATIONAL, INC.

Website: www.atas.com

Email: [email protected]

Corporate Headquarters:

Allentown, PA 18106

Phone: (610) 395-8445

Fax: (610) 395-9342

Western Facility:

Mesa, AZ 85204

Phone: (480) 558-7210

Fax: (480) 558-7217

Southern Facility:

Maryville, TN 37801

Phone: (800) 468-1441

3. PRODuCT DESCRIPTION

Basic Uses:

Short Rib Panel is a 1 ½” deep ribbed panel

that features six broad low and six narrow high

cells. This panel can be installed vertically

or horizontally on walls and used for roofing

applications.

Composition & Materials:

Standard Offerings: Short Rib Panel is roll-

formed from .032 and .040 Aluminum; 24

gauge Metallic Coated Steel; 24 gauge 55% Al-

Zn alloy Coated Steel with acrylic coating.

Special Offerings: 20 and 22 gauge Metallic

Coated Steel; 20 and 22 gauge 55% Al-Zn

alloy Coated Steel with acrylic coating may be

specified, subject to minimum quantities and

lead time.

Sizes:

Short Rib Panel has a 1 ½” high rib and is

36” wide. Panel lengths are cut to customer

specifications, with a minimum of 6’-0” and

maximum to transportation limitations and/or

product and project design considerations.

Colors & Finishes:

A choice of 30 stock colors is available in a

KYNAR 500® PVDF or HYLAR 5000® PVDF finish.

(Request color chart or chips). Texture may be

smooth or stucco embossed, depending on

gauge. Panels can be solid or perforated.

4. TECHNICAL DATA

KYNAR 500® PVDF or HYLAR 5000® PVDF based

finishes tested by paint supplier for:

Dry Film Thickness: ASTM D 1005, ASTM D

1400, ASTM D 4138 or ASTM D 5796

Specular Gloss: ASTM D 523

Pencil Hardness: ASTM D 3363

T-Bend Flexibility: ASTM D 4145

Mandrel Bend Flexibility: ASTM D 522

Impact Resistance: ASTM D 2794

Adhesion: ASTM D 3359

Water Immersion Resistance: ASTM D 870

Abrasion Resistance: ASTM D 968

Acid Resistance: ASTM D 1308

Acid Rain Resistance (Kesternich):

ASTM G 87 or DIN 50018

Salt Spray: ASTM B 117

Cyclic Salt Spray: ASTM D 5894 and

ASTM D 5487

Humidity Resistance: ASTM D 2247

Accelerated Weathering: ASTM D 822 and

ASTM G 155, ASTM G 151 or ASTM G 153

Color Retention, Florida Exposure:

ASTM D 2244

Chalking Resistance – ASTM D 4214

Cleveland Condensing Cabinet: ASTM D 4585

Cure Test, MEK Resistance: ASTM D 5402

Alkali Resistance, Sodium Hydroxide: ASTM D

1308, Procedure 7.2

Organic coatings meet requirements of AAMA

2605 when applied to aluminum.

Panel testing/ratings:

UL Fire resistance rating design numbers: See

www.ul.com, File R12113, or contact ATAS for

current listing.

Galvanized Steel: ASTM A 653

55% Al-Zn alloy Coated Steel: ASTM A 792

Aluminum: ASTM B 209

Coil Coating: ASTM A 755

Field Tested and Approved.

Load Tables available upon request.

5. INSTALLATION

Installation is with direct fastening

methods. When used in roofing applications

special practices and restrictions apply.

Recommended minimum slope is 1 1/2:12.

Installation manuals and hands-on training

via seminars are available through ATAS. Visit

www.atas.com for more information.

6. AvAILABILITY & COST

Availability:

Short Rib Panel is available through ATAS

product distributors. A complete line of related

components and trim accessories

is available to complete the wall system. In

addition, a complete line of rainware and

perimeter roof edge trims can be supplied

by ATAS to complement the wall system. Flat

sheet and/or coil stock is available in matching

color for fabrication of related components by

the installing contractor.

Cost:

Contact ATAS product distributors for current

pricing.

7. WARRANTY

Products coated with a fluoropolymer, KYNAR

500® PVDF or HYLAR 5000® PVDF finish carry a

limited warranty against chalking and fading.

8. mAINTENANCE

The Short Rib Panel is virtually maintenance

free. Surface residue may be easily removed by

conventional cleaning methods. For painted

products, minor scratches should be touched

up with a matching paint, available from the

manufacturer.

9. TECHNICAL SERvICES

Complete technical information and literature

are available at www.atas.com. ATAS will assist

with design ideas and shop drawings.

10. FILING SYSTEm

• www.atas.com

• Additional product information is available

from the manufacturer upon request.

Belvedere

TM

is a trademark of ATAS International, Inc.

KYNAR 500

®

is a registered trademark of Arkema.

HYLAR 5000

®

is a registered trademark of Solvay Solexis, Inc.

© ATAS International, Inc.

LRD0213 LAT741

36"

1½"

6"