ATAS Belvedere PenumWall BWS391 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1.PRODUCT NAME
PENUMWALL™ PANEL
BWS391
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
The PenumWall is a structural wall panel
that offers design freedom for all types of
buildings. The panel can be installed either
on solid substrate or spaced framing.
Composition & Materials:
Standard Offerings: PenumWall is available
in .032, .040 and .050 Aluminum; 24 gauge
Metallic Coated Steel; 24 gauge AZ55 55% Al-
Zn coated steel with acrylic coating.
Special Offerings: 20 and 22 gauge Metallic
Coated Steel; 20 and 22 gauge AZ55 55% Al-
Zn coated steel with acrylic coating may be
specified for PenumWall, subject to minimum
quantities and lead time.
Sizes and Profiles:
PenumWall has 1 1/4” high ribs and is 39 3/8”
wide. Panel lengths are cut to customer
specifications, 6’ minimum to 40’ maximum.
Colors & Finishes:
A choice of 30 colors is available in a KYNAR
500® PVDF or HYLAR 5000® PVDF finish.
(Request color chart or chips). An anodized
finish is available in Clear or Dark Bronze.
Texture may be smooth or stucco embossed.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF
based finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 23, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
UL Fire resistance rating design numbers: See
www.ul.com, File R12113, or contact ATAS
for current listing.
Galvanized Steel: ASTM A 653
AZ55 55% Al-Zn Coated Steel: ASTM A 792
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved
Load Tables available upon request.
5. INSTALLATION
Installation details or hands-on training
via seminars are available through ATAS.
Visit www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
PenumWall panels are available through
ATAS product distributors. A complete line
of related components and trim accessories
is available to complete the wall system. In
addition, a complete line of rainware and
perimeter roof edge trims can be supplied by
ATAS to complement the wall system.
Flat sheet and/or coil stock is available in
a matching color for fabrication of related
components by the installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry
a thirty (30) year limited warranty against
chalking and fading.
8. MAINTENANCE
PenumWall panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
PenumWall TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© 2011 ATAS International, Inc. LRD0711 LAT738
7 7⁄8"
1¼"
4½" 15⁄8"
39 3⁄8" C overage