beautypg.com

ATAS Corra-Lok Panel mFC160 User Manual

Atas international, inc, Specification data sheet, Corra-lok

background image

ATAS INTERNATIONAL, INC.

SPECIFICATION DATA SHEET

16 5⁄8”

2 ¾”

7⁄8”

1. PRODuCT NAmE

CORRA-LOK

Tm

mFC160

2. mANuFACTuRER

ATAS INTERNATIONAL, INC.

Website: www.atas.com

Email: [email protected]

Corporate Headquarters:

Allentown, PA 18106

Phone: (610) 395-8445

Fax: (610) 395-9342

Western Facility:

Mesa, AZ 85204

Phone: (480) 558-7210

Fax: (480) 558-7217

Southern Facility:

Maryville, TN 37801

Phone: (800) 468-1441

3. PRODuCT DESCRIPTION

Basic Uses:

Corra-Lok is a 16 5/8” wide by 7/8” deep structural

panel that provides dramatic shadow lines

with its 2 3/4” wide corrugations. Typical

applications include walls, equipment screens,

mansards and roofing. The system utilizes

concealed fasteners to offer uninterrupted

vertical or horizontal sight lines.

Composition & Materials:

Standard Offerings: Corra-Lok panels are roll-

formed from .032 and .050 Aluminum; 22 and

24 gauge Metallic Coated Steel and 24 gauge

55% Al-Zn alloy Coated Steel with acrylic

coating.

Special Offerings: 22 gauge 55% Al-Zn

alloy Coated Steel with acrylic coating; .040

Aluminum; 16 oz. Copper.

Sizes:

Corra-Lok panels have a 16 5/8” wide nominal

coverage. Panel lengths are cut to customer

specifications, with a minimum of 6’ and a

maximum to transportation limitations and/or

product and project design considerations.

Colors & Finishes:

A choice of 30 colors is available in a KYNAR

500

®

PVDF or HYLAR 5000

®

PVDF finish.

(Request color chart or chips). An anodized

finish is available in Clear or Dark Bronze.

Texture is smooth. Panels can be solid or

perforated.

4. TECHNICAL DATA

KYNAR

500

®

PVDF or HYLAR 5000

®

PVDF

based finishes tested by paint supplier for:

Dry Film Thickness: ASTM D 1005, ASTM D

1400, ASTM D 4138 or ASTM D 5796

Specular Gloss: ASTM D 523

Pencil Hardness: ASTM D 3363

T-Bend Flexibility: ASTM D 4145

Mandrel Bend Flexibility: ASTM D 522

Impact Resistance: ASTM D 2794

Adhesion: ASTM D 3359

Water Immersion Resistance: ASTM D 870

Abrasion Resistance: ASTM D 968

Acid Resistance: ASTM D 1308

Acid Rain Resistance (Kesternich):

ASTM G 87 or DIN 50018

Salt Spray: ASTM B 117

Cyclic Salt Spray: ASTM D 5894 and ASTM

D 5487

Humidity Resistance: ASTM D 2247

Accelerated Weathering: ASTM D 822 and

ASTM G 155, ASTM G 151 or ASTM G 153

Color Retention, Florida Exposure:

ASTM D 2244

Chalking Resistance: ASTM D 4214

Cleveland Condensing Cabinet: ASTM D

4585

Cure Test, MEK Resistance: ASTM D 5402

Alkali Resistance, Sodium Hydroxide: ASTM

D 1308, Procedure 7.2

Flame Spread Rating: ASTM E 84

Organic coatings meet requirements of

AAMA 2605 when applied to aluminum.

Panel testing/ratings:

Galvanized Steel: ASTM A 653

55% Al-Zn alloy Coated Steel: ASTM A 792

Aluminum: ASTM B 209

Copper: ASTM B 370

Coil Coating: ASTM A 755

Field Tested and Approved.

Load Tables available upon request.

5. INSTALLATION

Corra-Lok panels have a positive panel-to-

panel interlock. Recommended minimum

slope is 4:12. Installation manuals and

hands-on training via seminars are available

through ATAS. Visit www.atas.com for more

information.

6. AVAILABILITY & COST

Availability:

Corra-Lok panels are available through ATAS

product distributors. A complete line of

related components and trim accessories

is available to complete the wall system. In

addition, a complete line of rainware and

perimeter roof edge trims can be supplied

by ATAS to complement the wall system. Flat

sheet and/or coil stock is available in matching

color for fabrication of related components by

the installing contractor.

Cost:

Contact ATAS product distributors for current

pricing.

7. WARRANTY

Products coated with a fluoropolymer, KYNAR

500

®

PVDF or HYLAR 5000

®

PVDF finish carry

a limited warranty against chalking and fading.

8. mAINTENANCE

Corra-Lok panels are virtually maintenance

free. Surface residue may be easily removed by

conventional cleaning methods. For painted

products, minor scratches should be touched

up with a matching paint, available from the

manufacturer.

9. TECHNICAL SERVICES

Complete technical information and literature

are available at www.atas.com. ATAS will assist

with design ideas and shop drawings.

10. FILING SYSTEm

• www.atas.com

• Additional product information is available

from the manufacturer upon request.

Corra-Lok

TM

is a trademark of ATAS International, Inc.

KYNAR 500® is a registered trademark of Arkema.

HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.

© ATAS International, Inc.

LRD0213 LAT747