ATAS Belvedere Corrugated Panel BWC374 - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
37 ¼”
2.67”
7⁄8”
1. PRODUCT NAME
BELVEDERE™
CORRUGATED PANEL
BWC374
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
BWC374 is an economical, 7/8” high corrugated
product with excellent performance
characteristics. This panel can be installed
vertically or horizontally on walls and used for
roofing applications.
Composition & Materials:
Standard Offerings: The BWC374 panel is roll-
formed from .032, .040 and .050 Aluminum; 24
gauge Metallic Coated Steel; or 24 gauge 55%
Al-Zn alloy Coated Steel with acrylic coating.
Special Offerings: 20, 22 gauge Metallic
Coated Steel; 20, 22 gauge 55% Al-Zn alloy
Coated Steel with acrylic coating; 16, 20 oz.
Copper may be specified, subject to minimum
quantities and lead time.
Sizes:
The BWC374 panels are 40 7/8” wide with
a 37 1/4” wide net coverage area. Panel
lengths are cut to customer specifications,
with a minimum of 6’ and a maximum to
transportation limitations and/or product and
project design considerations.
Colors & Finishes:
A choice of 30 stock colors is available in a
KYNAR 500® PVDF or HYLAR 5000® PVDF finish.
An anodized finish is available in Clear or Dark
Bronze. (Request color chart or chips). Texture
may be smooth or embossed. Panels can be
solid or perforated.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF
based finishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005,
ASTM D 1400, ASTM D 4138
or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894
and ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet:
ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide:
ASTM D 1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
UL Fire resistance rating design numbers: See
www.ul.com, File R12113, or contact ATAS for
current listing.
Galvanized Steel: ASTM A 653
55% Al-Zn alloy Coated Steel: ASTM A 792
Aluminum: ASTM B 209
Copper: ASTM B 370
Coil Coating: ASTM A 755
Field Tested and Approved.
Load Tables available upon request.
5. INSTALLATION
Installation is with direct fastening
methods. When used in roofing applications
special practices and restrictions apply.
Recommended minimum slope is 3:12.
Installation manuals and hands-on training
via seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
The BWC374 panel is available through ATAS
product distributors. A complete line of
related components and trim accessories is
available to complete the roof or wall system.
In addition, a complete line of rainware and
perimeter roof edge trims can be supplied by
ATAS to complement the project. Flat sheet
and/or coil stock is available in matching color
for fabrication of related components by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry a
limited warranty against chalking and fading.
8. MAINTENANCE
The BWC374 panel is virtually maintenance
free. Surface residue may be easily removed by
conventional cleaning methods. For painted
products, minor scratches should be touched
up with a matching paint, available from the
manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Belvedere TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© ATAS International, Inc. LRD0213 LAT742