Associated Equipment 12-1012 Manual - Manual (Page 36)

_______________________________________________________________________________
- 36 -
Model 12-1012 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
2. Press key to continue and the display will show: (Fig.44)
3. Switch the ignition key to ON and start cranking the engine until it
starts. Immediately after that press key and the results will
show as follows (Figure 45):
4. If the voltage drop is too great during the cranking, the tested results
will display as follows (Figure 46) and will prompt you to check the
starter system.
Figure 44
Figure 45
Figure 46
Voltage: 12.65V
Crank engine now
until it starts.
Then press Enter
MinVolts: 9.56V
VoltDrop: HIGH
Chk Starter Sys
Battery has aged
CRANKING TEST
MinVolts: 10.26V
VoltDrop: Normal
Results: OK