beautypg.com

Associated Equipment 12-1012 Manual User Manual

Page 21

background image

_______________________________________________________________________________

-

21 -

Model 12-1012 Users’ Manual Version 13.08

Associated Equipment Corp.

5043 Farlin Ave.

800-949-1472(US)

St. Louis, MO 63115 314-385-5178 (Outside US)

will decrease so it reads near its rating. While this value is not
the same as a CCA test, it is the best available measurement for
showing a battery's current condition in relation to its rating.

From the above example, a 630 CCA rated battery measuring
406 CCA available power does not mean that the battery would
pass a CCA test at 406 CCA. The available power reading shows
that the battery is not able to perform up to its rated ability (630
CCA).

In comparison to another battery when fully charged, the 630
CCA battery measuring 406 CCA is no stronger than a 400 CCA
battery showing 400 CCA available power when fully charged.

The available power number is meant for comparison to its own
rating. In fact, in this example the 630 CCA battery is failing to
perform to its rating, while the 400 CCA battery is still working.

Basing on SAE, CCA test is a manufacturing process control
test applicable only on new, fully charged batteries. It does not
produce an actual value, but is a PASS / FAIL test.

It measures the discharge load, in amps, that a battery can
supply for 30 seconds at 0°F/-18°C while maintainin g a voltage
of 1.2 volts per cell (7.2 volts per battery) or higher.

Thus, the CCA test shows the minimum power requirement for
the battery as rated, which means a battery rated at 400 CCA
must measure 7.2 volts or above for 30 seconds when a load of
400 amps is applied at 0°F/ -18°C.

The above methods also hold for DIN, IEC, JIS, EN basing on its
individual ratings.


4.

Int. R (Internal Resistance):

6.43m

In normal condition, the internal resistance should fall between
2.0 m

~ 15.0 m

. As a matter of fact, the higher the battery

CCA readings obtained the lower the internal resistance should
be.


5.

LIFE:

76 %

This is an indication of the battery life expectancy in percentage. If
the life falls below 45 %, the RESULT will display “Replace” and it
is time to change to a new battery.