Associated Equipment 12-1012 Manual - Manual (Page 16)

_______________________________________________________________________________
- 16 -
Model 12-1012 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
4. Pressing key once will scroll down to the next item if there is a
need to select it.
5. As an example (Fig.14) the selected item was on “Battery Test” and it is
being highlighted.
6. Press key will proceed to do the battery testing and if it has
detected any surface charge on the battery, it will start to remove and a
message is shown (Fig. 15) below.
7. If the surface charge is too great for the analyzer to handle, it will prompt
you with the instructions as shown: (Fig. 16) below.
8. Wait until the surface charge removal had completed, the analyzer will
advise as follows: (Fig.17) and then press key.
Figure 17
Figure 16
Figure 15
Removing Surface
Charge...
Please Wait!
Turn ign.key ON.
Headlights ON to
remove Surface
Charge...
Surface Charge
now removed. Key
& headlights OFF
Then press
Enter