4transportation and storage – Alpha Technologies Te41, 24V User Manual

Page 18

Argus Technologies Ltd.

057-102-C0 Rev B WC

Page 6 of 26

Transportation and Storage

4.1.1

Packaging

The enclosure and components are shipped on individual pallets and shrink wrapped. The enclosures and
components cannot be stacked.

The pallet is approximately 0.15m H x 1.22m W x 1.22m D (6” H x 48” W x 48” D) and the overall height including
pallet and enclosure is approximately 2.3m (91”).

For the optional external AC load center, the pallet will have a depth of 1.52m (60”).

Batteries will be shipped on a separate pallet and packaged per the manufacturers guidelines.

NOTE: Packaging assemblies and methods are tested to International Safe Transit Association standards.

4.1.2

Storage

The weight of the enclosure is listed in the specifications. The equipment pallet can be moved using a forklift.

Do not hoist/lift enclosure with batteries installed.

If the batteries are installed, the warehouse facility may have to be certified for handling such goods. Typically, the
batteries will be on a separate pallet; the same requirements for certification will apply.

4.1.3

Site Considerations (see Section 5)

It is assumed that the site will be ready for enclosure installation upon arrival. Two able-bodied persons will be
required at the site to lift and place the enclosure and components.

4.1.4

Inspection

Prior to unpacking the equipment, perform a visual inspection and note any damage. Unpack the equipment and
inspect the exterior for damage. If any damage is observed contact the carrier immediately.

Continue the inspection for any internal damage. In the unlikely event of internal damage, please inform the
carrier and contact Argus Technologies for advice on the consequence of any damage.

Verify that you have all the necessary parts per your order for proper assembly.

Call Argus Technologies if you have any questions before you proceed: 1 (888) 462-7487