Alpha Technologies Te41, 24V - Manual (Page 16)

Argus Technologies Ltd. 057-102-C0 Rev B WC
Printed in Canada. © 2009 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved. Page 4 of 26
3 Accessories (Options)
3.1 Additional Cordex Rectifier Shelf
See Cordex rectifier manual included with the system documentation package.
3.2 Equipment Mounting Slides
Optional equipment mounting slides can be added to the system in the battery/customer equipment compartment.
Figure 4–Equipment mounting slide (2PL)
3.3 Battery Shelves
Battery shelves are designed to accommodate different battery manufacturers as shown in the following table:
Battery Manufacturer/Number Height mm (in.)* Width mm (in.) Length mm (in.) Weight kg (lb.)
GNB M12V155FT 283.2 (11.15) 124.5 (4.90) 558.8 (22.00) 53.98 (119.0)
Alpha SpaCell SMU-F 155 281.9 (11.10) 124.5 (4.90) 556.3 (21.90) 53.98 (119.0)
Alpha SpaCell SMU-F 170 309.9 (12.20) 124.5 (4.90) 556.3 (21.90) 58.88 (129.8)
East Penn 12AVR-150ET 298.5 (11.75) 124.5 (4.90) 558.8 (22.00) 52.16 (115.0)
C&D TEL12-150F 318.3 (12.53) 122.7 (4.83) 557.5 (21.95) 56.52 (124.6)
C&D TEL12-180F 320.0 (12.60) 125.7 (4.95) 533.7 (21.01) 59.42 (131.0)
Enersys 12V155FS 281.9 (11.10) 124.5 (4.90) 561.3 (22.10) 56.97 (125.6)
NSB 170 320.0 (12.60) 125.0 (4.92) 558.8 (22.00) 57.88 (127.6)
* 8RU typical
Table A–Battery manufacturers
Straps are used to secure batteries within the enclosure upon installation.
NOTE: Batteries will be shipped on a separate pallet and packaged per the manufacturers guidelines.
3.4 GMT Fuse Distribution
An optional 8-position GMT fuse block assembly provides DC power distribution for smaller customer equipment
mounted in the rack space. This will be located under the right side of the DC distribution in the power equipment
compartment.