ABUS FU8007 Secvest 2WAY Base Kit Operating instructions - Manual (Page 7)

7
6. Activating the wireless alarm system
The wireless alarm system can be activated in a variety of ways . The system emits an acoustic message. Depending on whether a partition or the complete system
is activated, the message is: “Partition activated” or “Alarm system activated”.
6.1. Fast activation
Please note that this
function can also be
deactivated to prevent
unauthorised operation of
the system. This function is
located in the installer
menu under System
Options -> User access ->
Quick set.
To activate the complete
wireless alarm system,
simply press the active key
as shown.
6.2. User code
If the fast activation
function is deactivated, a
user code is also needed to
activate the system. If the
system has only one
partition, then simply enter
your user code. The
partition for which this user
code is valid is then
activated. If your user code
is valid for two or more
partitions, then a selection
of areas that can be
activated is displayed. For
more information, see
chapters 11 and 12
(“Activating partitions” and
“Activating internally”).
6.3. Remote control
You can activate the
complete wireless alarm
system by pressing the
“Fully active” button on the
remote control. The other
buttons on the remote
control can be used for
activating a partition or
activating the wireless
alarm system internally. For
more information, see
chapters 11 and 12
(“Activating partitions” and
“Activating internally”).
6.4. Chip key
The chip key can be used
to fully activate/deactivate
the wireless alarm centre or
a partition. The chip key is
used in place of the user
code. If a user is authorised
to activate two or more
partitions with a chip key,
then they must decide
which partition to activate
after holding the chip key
against the system. For
more information, see
chapters 11 and 12
(“Activating partitions” and
“Activating internally”).
6.5. Wireless cylinder
The wireless cylinder can
also be used to fully
activate the system or a
partition. To activate the
wireless alarm system, first
press the button on the
cylinder and then lock the
door. The alarm system is
activated after the door is
locked.
FU8100
FU5150
FU5155