ABUS FU8007 Secvest 2WAY Base Kit Operating instructions - Manual (Page 19)

19
18. Settings in the user menu
18.1. First steps in the user menu
In the user mode, proceed as follows:
Press the control button under Menu .
Enter a valid user code or master code.
The default master code is 1234:
1 2 3 4
The wireless alarm system accesses the user menu and the following graphic
display is shown:
Using the control buttons , you can scroll through the menu items in the
installer menu. For a list of the menu items, see the next page.
To select a menu item, press the control button under Select .
To exit a menu item, press the control button under Back.
To exit the user menu, press the control button under Exit.
18.2. Overview of menu items in the user menu
Among other things, the user menu can be used to program the user code,
omit zones, record voice messages, read the log, activate control functions
and test detectors.
Some functions may have been blocked for the user by the installer. The
following table lists all possible menu items.
Menu item Settings
Voice Memo Play, record and delete voice messages
Omit Zones Omit zones and remove them from surveillance
Users Install, edit and delete users
View Log Read log entries
Facilities On/Off Activate/deactivate additional functions (door chime,
voice prompt and activity monitoring)
Test Test functions on the alarm centre and detectors
System Options Enter date and time, activate remote maintenance,
summer/winter time, communication information
Follow Me Enter the follow me number
Outputs On/Off Control manual outputs
Telephone Call Start manual telephone call
The user menu is equipped with a time control. If there is no input within
30 seconds, the user menu is exited automatically.