ABUS FU8007 Secvest 2WAY Base Kit Operating instructions - Manual (Page 27)

27
18.6. Viewing the log
This function enables you to read the event log. This log contains the last 250
events together with the date and time. The log cannot be deleted. When the
log is full, the oldest event is deleted to make room for a new event (FIFO
memory).
Select the View Log menu item.
Select the corresponding report trigger. To display report trigger details such
as time and date, select Expanded.
Exit this menu item by pressing Back.
If Expanded was confirmed with the control button, the following graphic
display is shown:
You can also scroll through the log using the control buttons . To return
to the list, select the List menu item. To exit the log, select Back.
The following list gives an overview of the entries and their meaning.
Entry Meaning
Lid Tamper The tamper contact of the housing lid was
opened.
Lid Tamp Restore The tamper alarm of the housing lid was
confirmed.
Telecmd U-- Low Bat The remote control battery of user -- must be
replaced.
Pendant U-- Low Bat The pendant of user -- must be replaced.
Batt Missing There are no batteries in the system.
Batt Fault Restore Batteries were fitted in the system.
Invalid No entry.
Configuration Fail Error when storing the programming.
Codes Defaulted All user codes were reset.
Defaults Loaded The factory default settings were loaded.
System Startup The system has been put into operation.
System Tamper Tamper detection on a detector or system.
System Tamper Rstr The tamper alarm was confirmed.
U-- On-Site The installer has accessed the installer menu.
U-- Off-Site The installer has exited the installer menu.
Entry Meaning
U-- Change U-- User -- has edited user --.
U-- Delete U-- User -- has deleted user --.
U-- Ptn # Set User -- has activated partition #.
U-- Ptn # UnSet User -- has deactivated partition #.