ABUS FU8007 Secvest 2WAY Base Kit Operating instructions - Manual (Page 30)

30
18.8. Test
This menu is used to test the different alarm centre functions.
Select the “Test” menu item.
Select the function you wish to test.
To end the test, select Back.
Function Meaning
Siren Tests local alarms on the system and external sirens.
Loudspeaker Tests the loudspeaker function.
Keypad Tests the keypad function.
Walk Test Tests the functions of the individual zones.
Outputs Tests the wired and wireless outputs.
Telecommands Tests the remote control (telecommand) functions.
Pendants Tests the social care transmitter (pendant) functions.
PA Detector Tests the panic detector functions.
Tag Tests the chip key (tag) functions.
Siren
Press On/Off to activate and deactivate the siren. On or Off at the top-right of
the display indicates whether or not the siren should be heard.
Loudspeaker
Press Play/Stop to play the voice messages over the loudspeaker. You can
listen to all voice messages saved in the system. Playing is shown at the top-
right of the display and the voice message should be heard.
Keypad
Press each button once. The corresponding character is shown on the
display in response. Press the double keys simultaneously to start the test.
Press OK to end the test.
Walk Test
A list of all detectors installed on the system is shown on the display. Go
through the property and trigger all detectors one after the other. Each time a
detector is triggered, the alarm centre emits a double tone and “S” is
displayed at the end of the row for the corresponding detector. Please note
that “24 Hour” and “Fire” zones cannot be tested.