ABUS FU8007 Secvest 2WAY Base Kit Operating instructions - Manual (Page 24)

24
18.5.1.4. Changing the user code
Select the Code menu item.
Enter the new four-digit code via the keypad. After entering the last digit, you
are prompted to repeat your input.
If both codes are identical, the code is saved.
18.5.1.5. Training and removing chip keys, remote controls, pendants
and panic transmitters
Follow the instructions in the display to train the corresponding components to
the wireless alarm system. The following page shows how to train the different
components.
Components can be removed from a user in the same way as they are
assigned. In this case, follow the instructions in the display.