Physio-Control LIFEPAK 20e - Manual (Page 70)

Monitoring
3-24 LIFEPAK 20e Defibrillator/Monitor Operating Instructions
15 CO
2
does not appear on
screen when FilterLine is
connected.
CodeManagement Module not
properly connected to
defibrillator. • Contact qualified service
personnel.
Low battery voltage. • Connect to AC power.
Defective battery in
CodeManagement Module. • Contact qualified service
personnel.
CodeManagement Module
malfunction. • Contact qualified service
personnel.
Table 3-4 Troubleshooting Tips for EtCO
2
(Continued)
Observation Possible Cause Corrective Action