Pacing setup menu, Monitoring menu, Channels setup menu – Physio-Control LIFEPAK 20e User Manual
Page 145: Pacing setup menu -9 monitoring menu -9, Channels setup menu -9, Table 8-9
8
S
etu
p
Opti
ons
Setup Options
LIFEPAK 20e Defibrillator/Monitor Operating Instructions
8-9
©2006-2013 Physio-Control, Inc.
PACING SETUP MENU
The Pacing Setup menu allows you to define noninvasive pacemaker settings. When you select
a menu item, the screen displays a help message. The underlined options are factory default
settings.
MONITORING MENU
Use the Monitoring menu to define settings for the ECG and SpO
2
monitoring. When you select a
menu item, the screen displays a help message. The underlined options are factory default
settings.
Channels Setup Menu
To define the default set and up to five optional waveform sets for Channels 1 and 2, select an
item from the Channels Setup menu.
Table 8-9
Pacing Setup Menu
Menu Item
Help Message
Options
RATE
Default pacing rate
40–170
,
60 PPM
.
CURRENT
Default pacing current
0
–
200
mA.
MODE
Default pacing mode
DEMAND
or
NON-DEMAND
.
INTERNAL
PACER
Detect internal pacemaker and
print arrows
DETECTION OFF
or
DETECTION ON.
Table 8-10
Monitoring Menu
Menu Item
Help Message
Options
CHANNELS...
Set up default channel
waveforms
CONTINUOUS ECG
Continuously store ECG
waveform
ON
or
OFF
.
SPO2 TONE
SpO2 pulse tone
ON
or
OFF
.
CO2...
Set up CO2 defaults
Refer to
.
Table 8-11
Channels Setup Menu
Menu Item
Help Message
Options
Default
SET
Select default waveform set
SET 1
,
SET 2
,
SET 3
,
SET 4
, or
SET
5
.
SET 1
Select channel waveforms for Set 1
Refer to
.
SET 2
Select channel waveforms for Set 2
Refer to
.
SET 3
Select channel waveforms for Set 3
Refer to
.
SET 4
Select channel waveforms for Set 4
Refer to
.
SET 5
Select channel waveforms for Set 5
Refer to
.