Physio-Control LIFEPAK 20e - Manual (Page 61)

3
M
o
n
itoring
Monitoring
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 3-15
©2006-2013 Physio-Control, Inc.
6 SPO2: UNKNOWN SENSOR
message appears.
A sensor is connected to the
device that is not compatible
with the Masimo Sp0
2
module.
• Refer to "Pulse Oximeter
Sensors," page 3-13 for
sensor compatibility.
7 SPO2: SEARCHING FOR
PULSE
message appears.
A sensor is connected to the
patient and is searching for a
pulse. • Wait for completion.
8 SPO2: LOW PERFUSION
message appears.
Patient has a weak pulse. • Change sensor location.
Table 3-3 Troubleshooting Tips for SpO
2
(Continued)
Observation Possible Cause Corrective Action