Extron Electronics IPL 250 Reference Manual - Manual (Page 13)

1-5 IPL 250 • Introduction
Creating a Control System Using the IPL with Optional
Extron TouchLink ™ Touchpanels
Not only can the IPL 250 act as a stand-alone controller that can be accessed via
its internal and GlobalViewer Web pages, but it also can act as the centerpiece of
a control system that features Extron TouchLink Touchpanels. The touchpanels
provide a convenient, aesthetically pleasing interface for controlling the IPL, which,
in turn, controls the other system components.
If you have additional questions or need support for your Extron control system
installation, contact the Extron S3 Control Systems Support Hotline .
System Requirements
The IPL 250 and Global Configurator have the following hardware and software
requirements:
Hardware requirements
• Intel ® Pentium ® III, 1 GHz processor
• 512 MB of RAM
• 50 MB of available hard disk space
• A network connection with a minimum data transfer rate of 10 Mbps (100 Mbps
is recommended)
Software requirements
For GUI Configurator and Global Configurator 3:
• Microsoft
® Windows ® operating system
○ Windows XP service pack 2,
○ Windows Vista
® or
○ a higher version of Windows
C Do not run Global Configurator software on a PC that uses an earlier
version of Windows.
Global Configurator has the following system requirements in addition to those
listed above:
• Microsoft Internet Explorer
® 6.0 or higher with ActiveX ® enabled
• Microsoft Windows Script 5.6