beautypg.com

Extron Electronics MSX1616HR User Manual

Page 24

background image

22

MSX1616 OPERATION MANUAL - v1.0 5/8/02

2002 - INLINE, INC.

Resetting the Switcher

1. Press

MENU until

0DLQ 0HQX displays in the LCD.

2. Press the soft key pointing to

$GYDQFHG.

Result:

$GYDQFHG 0HQX displays in the LCD.

3. Select the soft key pointing to

5HVHW 8QLW.

Result:

5HVHW 0HQX displays in the LCD.

4. You can do either a partial reset or a full reset.

a. To do a partial reset, press the soft key pointing to

3DUWLDO 5HVHW.

Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, sets all outputs to un-mute state, and removes any
address given to the unit.

i. Press

ENTER to reset.

ii. Press

MENU to exit.

b. To do a full reset, press the button pointing to

)XOO 5HVHW.

Result: The switcher resets the RS232 serial port, opens all input/output patches,
resets all volume levels, removes any address given to the unit, and clears all
saved presets and labels. This process may take up to 2 minutes, if all presets are
used.

i. Press

ENTER to reset.

ii. Press

MENU to exit.

Activating RGB Delay


This feature allows older model projectors (or a series of projectors) time to synchronize their
signals so the image pops cleanly and clearly onto the screens. Set RGB delay for up to 6
seconds.

1. Press

MENU until

0DLQ 0HQX displays in the LCD.

2. Press the soft key pointing to

$GYDQFHG.

Result: Advanced Menu displays in the LCD.

3. Select the soft key pointing to

5*% 'HOD\.

Result:

5*% 'HOD\ 7LPH displays in the LCD.

4. Use either the up-and-down or the left-and-right menu navigation buttons to set the RGB

delay time.

5. Press

ENTER to accept the changes.

6. Press

MENU to exit.

This manual is related to the following products: