Extron Electronics MSX1616HR - Manual (Page 19)

17

2002 - INLINE, INC. MSX1616 OPERATION MANUAL - v1.0 5/8/02
To recall a saved preset:
1. To recall a preset, press PRESET.
Result: The LEDs above the buttons designating saved presets glow.
2. Select the desired preset by pressing the corresponding button.
Note: The MSX1616 includes special labeling strips so you can label what
functionality you assigned to which preset.
Previewing Patches in Preview Mode
Once you create a patch, you can preview it and other existing patches.
1. Press the soft key pointing to
3UHYLHZ.
Result:
6HOHFW ,1387287387 WR 9LHZ &XUUHQW &RQQHFWLRQV displays
on the LCD.
2. Press any input or output button.
Result: The LED above each button corresponding to a patched input/output glows.
Press CANCEL to exit Preview mode.
If you need to change any patches, exit this feature and follow the Matrix Mode instructions
above or press the LCD buttons pointing to
,Q or 2XW.
Recalling Presets in Express Mode
Express Mode lets you recall presets with the touch of one button.
1. Press PRESET twice in succession.
Result: The LCD prompts you to press ENTER to accept or MENU to go back to
Matrix Mode.
2. Press ENTER.
Result: The LCD indicates that you are in Express Mode.
3. The LED(s) above the buttons corresponding to the first 32 (16 x 16) or 48 (32 x 16)
previously saved preset(s) glows. Press one of these buttons to recall the preset
associated with it.
4. You will stay in Express mode until you explicitly exit it using a serial command or as
explained below.
To exit Express mode:
Press CANCEL and MENU simultaneously.
Result: The LED returns to Matrix Mode and displays the main screen.