Extron Electronics GSS 100 User Guide - Manual (Page 45)

Email Alerts Page
The E-Mail Alerts page is an artifact of the HTML pages of other Extron products and has no
function for the GSS 100. Future firmware revisions may remove this page.
Firmware Upgrade Page
The Firmware Upgrade page provides a way to replace the firmware that is coded on
the control board of the GSS 100 without taking the GSS 100 out of service. Access the
Firmware Upgrade page (see figure 25) by clicking the
Firmware Upgrade link on the
System Settings page.
Passwords
System Settings
Video Settings
Refresh
No function on GSS
Figure 25. Firmware Upgrade Page
Update the GSS 100 firmware as follows:
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls
all GSS 100 operation. To insert your own custom HTML pages, see “ File
Management Tab .”
1. Visit the Extron website, www.extron.com , select the GSS 100 product category, select
the latest firmware installation package (*.exe file) for the GSS 100, and download the
file. Note the folder to which you save the firmware file.
2. Run the executable (*.exe) file to decompress the firmware file.
3. Connect the PC to the GSS 100 via the LAN port of the GSS 100.
4. Access the GSS 100 using HTML pages.
5. Click the Configuration tab.
GSS 100 Graphic Still Store • HTML Control and IPL File Manager 39