Extron Electronics GSS 100 User Guide - Manual (Page 29)

Command/Response Table for SIS Commands (continued)
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Output rate
Set the output rate X% * X^ = Rte X% * X^] Set the output resolution for the stored image to X%
at X^ Hz.
NOTE: The output rate (=) command affects the display of the stored images only; pass-through sources are output exactly as they are
input.
Example: 3*1= Rte3•1 ] Set the output resolution for the stored image to
1024 x 768 at 60 Hz.
Read output rate = X% * X^] The output resolution of the stored image is X% at X^ Hz.
Output sync
Set the output sync format 6* X& # Syn X&] Set the output sync format of the stored image to X& .
NOTE: The output sync format (6#) command affects the display of the stored images only; pass-through sources are output exactly as
they are input.
Example: 6*0# Syn0 ] Set the output sync format for the stored image to
RGBHV.
View output sync format 6# X&] The output sync format for the stored image is X& .
Set the output sync polarity 7* X* # Pol X*] Set the output sync polarity of the stored image to X* .
NOTE: The output sync polarity (7#) command affects the display of the stored images only; pass-through sources are output exactly as
they are input.
Example: 7*0# Pol0 ] Set the output sync polarity for the stored image to
H– and V–.
View the output sync
polarity 7# X*] The output sync polarity for the stored image is X* .
RGB delay (for pass-through)
Set RGB delay 8* X# # Dly X#] Set the RGB delay value (video mute) before displaying
the RGB pass-through input to
X# .
Read RGB delay 8# X#]
Video mute
Mute video 1B Vmt1 ] Mute the output video (black screen)
Unmute video 0B Vmt0 ] Unmute the output video (output video)
Show video mute status B X@]
Front panel lock (Executive mode)
Partially lock front panel 1X Exe1 ] Partially lock the front panel. Only the Image and Take
buttons function.
Completely lock front panel 2X Exe2 ] Lock all front panel functions.
Unlock front panel 0X Exe0 ] Unlock the front panel.
Show front panel lock status X X(]
NOTE: X@ = On / off status 0 = off 1 = on
X# = Time (duration) 00 – 50 (0.0 to 5.0 seconds) for RGB delay duration
X% = Resolution
0 = 640 x 480 5 = 1024 x 1024 10 = 1366 x 768 15 = 720p
1 = 600 x 600 6 = 1280 x 768 11 = 1365 x 1024 16 = 1080i
2 = 852 x 480 7 = 1280 x 1024 12 = 1400 x 1050 17 = 1080p
3 = 1024 x 768 8 = 1360 x 765 13 = 480p 18 = 1280 x 800
4= 1024 x 852 9 = 1365 x 768 14 = 576p 19 = 1440 x 900
X^ = Refresh rate
0 = 50 Hz 2 = 72 Hz 4 = 100 Hz
1 = 60 Hz 3 = 96 Hz 5 = 120 Hz
X& = Sync format 0 = RGBHV 1 = RGBS
X* = Sync polarity
0 = H– / V– 1 = H– / V+ 2 = H+ / V– 3 = H+ / V+
X( = Front panel lock modes 0 = unlock 1 = partial lock 2 = complete lock
GSS 100 Graphic Still Store • Programming Guide 23