Extron Electronics GSS 100 User Guide - Manual (Page 16)

Menu System Overview
Figure 10 shows a flowchart of the main menus in the menu system.
Power
on
3 sec.
Menu
Default
Cycle
Menu
10 sec.
3 sec.
Menu Menu
Menu
Next
Extron
GSS 100
Output
Config
Menu Slide
Show
Advanced
Menu
Exit
Menu
Switch
Effect
10 sec.
Version
n . nn
10 sec. 10 sec.
10 sec.
Figure 10. Menu System Flowchart
Menu button — Press the Menu button to activate the menu system and to scroll through
the five main menus.
Next button — Press the Next button to move between the submenus of a selected main
menu, to activate one for viewing or configuration, and to save a selection.
Adjust/Select knob — When in a submenu, rotate the Adjust/Select knob to scroll through
the submenu options and select a setting. See the flowcharts in this section and specific
subsections for explanations of knob adjustments.
NOTES: • To return to the default cycle, let the GSS remain idle for 30 seconds until
the selected screen times out, or press the Menu button until the Exit Menu
appears, then press the Next button.
• From any menu or submenu, after 30 seconds of inactivity, the GSS saves all
adjustment settings and times out to the default LCD display cycle.
• The GSS saves settings to its non-volatile memory every 3 minutes. Ensure
that you wait at least 3 minutes after making any changes or those changes
may be lost.
Switch Effect menu
Figure 11 is a flowchart that shows an overview of the Switch Effect menu and the available
settings.
Menu Menu 10 sec. 10 sec.
Power
on
Menu
Default
Cycle
Next
Switch
Effect
Next Next
Menu
Menu
Menu
Menu
Menu
10
sec.
10
sec.
Output
Config
Slide
Show
Advanced
Menu
Exit
Menu
10
sec.
10
sec.
10
sec.
Effect
Cut
Duration
0.0 Secs
Output transition
• Cut • Dissolve
Dissolve duration
0.0 to 5.0 seconds in
0.1 second increments.
Figure 11. Switch Effect Menu Flowchart
GSS 100 Graphic Still Store • Operation 10