Extron Electronics GSS 100 User Guide - Manual (Page 18)

Resolution submenu
Rotate the Adjust/Select knob while in the Resolution submenu to select the resolution of
the stored image output. 1024 x 768 at 60 Hz is the default resolution.
NOTE: To view an uncropped full screen image at 1080p or 1080i, the image resolution
must be 1440 x 1080.
Resolution 50
Hz
60
Hz
72
Hz
96
Hz
100
Hz
120
Hz
640 x 480 • • • • • •
800 x 600 • • • • • •
852 x 480 • • • • •
1024 x 768 • • • •
1024 x 852 • • • •
1024 x 1024 • • •
1280 x 768 • •
1280 x 800 • •
1280 x 1024 • •
1360 x 765 • •
1365 x 768 • •
1366 x 768 • •
1365 x 1024 • •
1400 x 1050 • •
1440 x 900 • •
480p • •
576p • •
720p • •
1080i • •
1080p • •
Sync format submenu
Rotate the Adjust/Select knob while in the Sync format submenu to select the sync format
for the still image output. RGBHV is the default selection.
Sync polarity submenu
Rotate the Adjust/Select knob while in the Sync polarity submenu to select the sync polarity
(positive and negative) for the still image output. Horizontal and vertical negative sync are
the default selection.
RGB Delay submenu
The GSS can briefly blank the RGB (video) output while it switches between the stored
image and the pass-through image. This allows the change in display to appear without a
glitch. RGB delay is also known as Triple-Action Switching or video mute switching.
Rotate the Adjust/Select knob while in the RGB Delay submenu to set the delay between
0 and 5 seconds, in 0.1-second increments. No delay (0.0 seconds) is the default setting.
GSS 100 Graphic Still Store • Operation 12