Asus GigaX2048 - Manual (Page 94)

GigaX Series L2 Managed Switch User’s Guide
94
4.9.4 Policy Attach
A policy does nothing if you don't attach it to any ingress port. You can
use this page to attach a policy to ingress ports. A port only can attach
one policy.
Click on to save the configuration. Click on to
refresh the settings to current value. To make the configuration effective,
please go to "Save Configuration" page, then click on .
There are a few ways to attach a policy to ports:
• Attach to all ports: the policy will apply to all the ports of the system.
• Attach to certain ports: you can specify the ingress ports to be
applied.
• Detach all: remove the policy from the attached ports.