Asus GigaX2048 - Manual (Page 65)

GigaX Series L2 Managed Switch User Guide
4.6.3 Trap Setting
By setting trap destination IP addresses and community names, you can
enable SNMP trap function to send trap packets in different versions (v1 or
v2c). Click to save the configuration permanently or
to refresh the page.
Figure 40. Trap Setting
4.6.4 VACM Group
VACM (View-based Access Control Model) Group is used to configure the
information of SNMPV3 VACM Group.
Group Name: enter the security group name.
Read View Name: enter the Read View Name that the Group
belongs. The related SNMP messages are Get, GetNext, GetBulk.
Write View Name: enter the Write View Name that the Group
belongs. The related SNMP message is Set.